FEATURES

• Estimated dissolved hydrogen concentration
• Water temperature: 20°C Water: Mineral water

*Dissolved hydrogen concentration varies with water quality and water temperature.

• 2 minutes: 500ppb to 700ppb

Gallery

How to Install

Directions for Use

• Remove the cap and the spray pump. Then fill the bottle with water.
• Press the On/Off button located at the bottom. Green LED indication light will illuminate.
• Press the On/Off button again to start producing hydrogen sterilizing water. H2O Hydro-GEN Beauty is programmed to produce hydrogen sterilizing water in 2 minutes.
• To stop the hydrogen generation, press the On/Off button again.

How to Clean
Maintenance is necessary to ensure good performance of the product for a long time. As bubbles are reduced during production, it is time to clean. The hydrogen water generator is delicate, clean it carefully.

If minerals and calcium start to accumulate in the hydrogen generator, it will hinder hydrogen generation, and foreign matter and offensive odor may be discharged from the hydrogen generator.

Clean the product according to the following guidelines before starting to use the product.

Cleaning of Hydrogen Generator

• Fill the bottle with water and add 1-2 drops (not more than 5ml) of vinegar.
• Press the On/Off button to generate hydrogen for 1-2 cycles, then rinse with clean water.
• Recommended to clean once every 2 weeks, if used daily.

How to Charge
After a certain period of time, the internal battery will normally be discharged.

1. To charge, open the jack lid and connect the USB adapter (micro 5 pin) charging cable.

2. When the battery is fully charged, the RED LED light will change to GREEN. You may disconnect the USB cable and close the jack lid.

WARNING:
Never put metal or liquid inside the USB adapter jack.